Category Archives: News

IceTool Tri Can Leatherface Reindeer Cognac

Description

IceTool Tri Can Leatherface Reindeer Cognac is our top-of-the-line limited edition series snus can with a remowable silicone divider inside. This can is finished with the softest reindeer leather you can imagine.

Looking at it and feeling it in your hands tells the whole life span of the reindeer in the harsh arctic wilderness. You can see and feel every insect bite and scar on the softest hide. We use reindeer hides from the mystical Finnish Lapland, north of the Arctic Circle.

Measures: Diameter 72 mm / height 15 mm
Weight: 42 grams

10 Legitimate And Free Writing Contests

There are an incredible amount of talented writers all over the world. Many of them would love to enter writing contests for not only the prizes, but also the recognition of winning. However, much of the writing competitions available these days are scams. If you search for the term ‘writing contests’ you will get over 13,000,000 results. Sadly, most of them are from sites which just want your money. Luckily, we have done the hard work and found 10 legitimate and Free writing contests out there for you to enter. Unlike, numerous writing competitions found online, these will not charge you a fee to enter and are totally free.

 

 

FutureScapes Writing Contest – Fiction

 

For those writers that love to write about fiction, the FutureScapes writing competition is a great start. Keep in mind though, that submissions must be kept to less than 8,000 words in length. There are 2 major first and second place prizes – $2,000 for 1st place and $1,000 for second – and up to four runner-up prizes of $500.00 each.

 

Genre: Fiction

Fees: $0

Prizes: $2,000

Deadline: 07/15/2016

Website:  http://www.futurescapescontest.com

E-mail address:  [email protected]

 

Want to be a better writer? Then check out how to Improve Your Writing With Write The World

 

The L. Ron Hubbard Writers of the Future Contest – Fantasy, Science Fiction

 

With prizes given out every 3 months, the L. Ron Hubbard Writers of the Future Contest is a great competition to enter. If that wasn’t enough, there’s also an annual grand prize given out for a whooping $5,000. The submissions can only be up to 17,000 words and they can be either novelettes or short stories. The genres are fantasy or science fiction.

 

Genre: Fantasy, Science Fiction

Fees: $0

Prizes: $5,000

Deadline: Every 3 Months

Website:  http://www.writersofthefuture.com

E-mail address:  Joni Labaqui 1-323-466-3310 ext 1200

 

 

American-Scandinavian Foundation – Poetry, Fiction, or Creative Nonfiction

 

For those looking for their work to be published on top of the prizes, the American-Scandinavian Foundation writing contest is a must enter. You can earn the top prize of $2,500 and also get an excerpt of your winning entry published in the Scandinavian Review.  The prices are given every year and the entries must be in the creative nonfiction, poetry or fiction genre. They must also be written in Nordic language.

 

Genre: Poetry, Fiction, or Creative Nonfiction

Fees: $0

Prizes: $2,500

Deadline: June 1st

Website:  http://www.amscan.org

E-mail address:  [email protected]

 

 

The Pen Factor – Writer Discovery Engine – Fiction

 

The Pen Factor competition has one of the shortest word limits of most of these free writing contests. Consisting only of 1,500 words limit, the entry can be a short story or a first chapter. The Pen Factor, also known as the writer discovery engine, is just that, an online feedback and discovery engine for fiction writers. All of the entries receive 3 structured pieces of feedback. In return, one must review 3 parts of other competitors entries as this is all part of the entry process. Top prizes are $500.00.

 

Genre: Fiction

Fees: $0

Prizes: $500

Deadline: 06/21/2016

Website:  http://www.penfactor.com

E-mail address:  

 

 

Graywolf Press Nonfiction Prize – Non Fiction

 

With both a huge $12,000 top prize advance and a publication by the Graywolf Press, this writing competition has a lot to offer. The top awards go to the most innovative and promising literary nonfiction piece. However, the writer must be an amateur or one not yet established in the genre.

 

Genre: Non Fiction

Fees: $0

Prizes: $12,000

Deadline: January 31

Website:  https://www.graywolfpress.org

E-mail address:  

 

 

2016 NYC Emerging Writers Fellowship – Fiction

 

Funded by the Jerome Foundation, the 2016 NYC Emerging Writers Fellowship contest awards nine fiction writers for their work every year. There is no age limitations for those that can enter. However, contestants cannot be established writers in the fiction genre or they must be in the early stages of their careers.  

 

Genre: Fiction

Fees: $0

Prizes: $5,000

Deadline: 02/29/2016

Website:  http://centerforfiction.org/forwriters/grants-and-awards/

E-mail address:  

 

 

Drue Heinz Literature Prize – Fiction

 

For writers of short fiction stories, the Drue Heinz Literature Prize competition is perfect for them. This writing contest awards a $15,000 top prize as well as a publication by the University of Pittsburgh Press. You can submit short stories, two or more novellas or a combination of both. However, the total word count are between 150 to 300 typed pages.  

 

Genre: Fiction

Fees: $0

Prizes: $15,000

Deadline: May 1 through June 30

Website:  http://www.upress.pitt.edu/renderHtmlPage.aspx

E-mail address:  

 

 

Real Simple’s Life Lessons Essay Contest – Personal Essay

 

For writers looking to tell their personal stories, the Real Simple’s Life Lessons Essay Contest is a great place to start. With a top prize of $3,000, the entries must be no longer than 1,500 words.

 

Genre: Personal Essay

Fees: $0

Prizes: $3,000

Deadline: Yet to be announced

Website: http://bit.ly/253Nno4

E-mail address:

 

 

Hektoen Grand Prix Essay Contest – Essays

 

Dedicated to medical humanities, the Hektoen International essay contest offers two prizes annually. The entries must be no more than 1,600 words in two categories. For the top prize winner, a $1,200 is given for an essay based on their hospital section. The second prize of $1,000 goes to the best essay written on the several sections. These are Literary Vignettes, Physicians of Note, Art Flashes, or Moments in History.

 

Genre: Essays

Fees: $0

Prizes: $3,200

Deadline: Annually; 2016 deadline is March 31.

Website: http://www.hektoeninternational.org/index.php

E-mail address:  [email protected]

 

Having trouble writing? Take a look at How to Beat Writing Block and Motivate Yourself To Write

 

The Annual Austin Chronicle Short Story Contest – Fiction, Nonfiction

 

For those that have unpublished short stories, the Annual Austin Chronicle contest can be a great place to enter their work. The stories can be fiction or nonfiction and in short story from. The maximum allowed words are 2,500. Prizes for the top five finalists total $1,500.

 

Genre: Fiction, Nonfiction

Fees: $0

Prizes: $7,500

Deadline: Pending for 2016

Website:  http://www.austinchronicle.com/short-story-contest/

E-mail address:  

Keyword: light novel

7 Major Advantages of Plastic Injection Molding

Posted on: Sep 26, 2018, | By Candy, WayKen Marketing Manager

For a long time, manufacturers have always associated rapid tooling with mass production, steel machined durable press-forms, and considerable capital investments. And they ignore the fact that plastic injection molding is the ideal method for the production of a wide range of complex plastic components, and can benefit OEMs across many different industries. However, with the development of prototyping technologies, rapid injection molding has rightfully claimed its place among the foremost prototyping techniques.

What is Rapid Injection Molding?

Rapid injection molding process is technologically speaking the same as conventional injection molding. The main differences are in how the tooling is manufactured.

First, RIM uses different materials for its dies. In conventional processes, the aim is to make molds as durable as possible so they are manufactured from hardened steel that is a real hassle to the machine. Rapid injection molding is used for a smaller amount of runs so it can use softer materials. A widespread option is aircraft-grade aluminum alloys. They have a strength that is similar to steel but it is much easier to machine and polish them. That cuts the tooling time up to 30% in machining and up to 2-5 times in polishing.

Second, rapid injection molding dies can be redesigned easier. Molds for mass production injection molding are solid because fewer joints mean higher precision and longer life. Prototyping processes can sacrifice a little bit of precision to get better flexibility and that is why the cavity is manufactured as a separate part from the base of the dies. That way, if you need to make an adjustment, you can just remove the cavity and leave the rest untouched.

Third, rapid injection molding uses less automation than conventional rapid injection molding and that means it requires less time to design, manufacture, and fine-tune the tooling.

Conventional rapid injection molding processes use a lot of automotive ejectors, loads, and other auxiliary mechanisms to further increase their performance. However, prototyping is not about cutting time for each part produced, it is about cutting preparation time. So, if we replace automotive mechanisms with manually mounted ones, a lot of time can be saved when manufacturing the injection system.

All of the mentioned points result in the prototyping time being cut drastically. What it means for the client is that he can get his parts in 2-5 weeks with rapid injection molding instead of 2-5 months with conventional injection molding.

The Advantages of Rapid Injection Molding Offers for Prototype Manufacturing

Surely, even despite the modifications that have enabled RIM to be used for prototyping, making a mold is still a long and complex process. For example, 3D printing the part takes 2-5 days, not weeks. So why bother with Rapid Injection Molding?

Rapid injection molding processes offer a number of benefits not found in other prototyping techniques

1.Strength

With the design for manufacturability, which ensures optimum ejection angles and uniform wall thickness, the liquefied resin is injected into the cavity under high pressure. It ensures that the part has no pores and the quality of the final material is the best possible. Such things can’t be said about 3D-printing that uses powder or thin threads and sinters them together. As a result, the final material may have pores or unsintered regions.

2.Surface Finish

The surface finish of the molded part depends on the quality of the mold. The cavity is usually manufactured by CNC milling and then some finishing operations. The most widespread among them is polishing. In addition, EDM cutting is used to sharpen the inner corners of the cavity. The resulting surface finish can be as small as Ra 0.8 mcm.

3.Outstanding Precision

Injection Molding offers great precision compared to other prototyping techniques. For example, 3D printing will yield an IT9 at best while rapid injection molding is limited only by the mold precision, which can be as high as IT7.

4.Almost zero Material Waste

A lot of prototyping techniques don’t take materials into account at all. And that is okay when you are manufacturing single-digit batches. However, some products require extensive testing in live conditions. For example, medical prototypes, their last testing stage involves giving out the product to the consumers for everyday life tests. That means you’ll need hundreds or even thousands of samples and losing 50% of the blank material or more will cost you a considerable sum. Now, RIM injects only the required amount of plastic into the cavity, bringing the waste to a minimum.

5. The Mold Can Be Used for a Considerably Large Batch

Most prototyping processes excel at creating a small number of parts. For example, silicone casting is viable for up to 15 parts or so. After that, the casting form deteriorates too much and you need to manufacture another form. Rapid Injection molds are not as durable as conventional ones but they can still withstand many more runs than most prototyping processes. The best of them can create up to 100,000 parts before becoming too worn.

6.Universality

3D printing with a different plastic will require a considerable rehashing of the whole system. You’ll need to change the cartridge with the blank material and change a lot of settings to be able to print the same part from another plastic. In the worst case, you’ll need completely different equipment. When we talk about injection molding, that isn’t necessary. The mold is made of high-grade aluminum whose properties are much higher than that of any plastic. That is why you can basically use any material with the mold you’ve manufactured.

7.Efficiency

Prototyping techniques are not very effective if we compare them with mass production. A single part will be machined for a much longer time than the same part when it is mass-produced merely because of the fact that the blank is closer to the final part and there is less to the machine. In addition, the machining processes for mass production are optimized to minimize blank setup and trajectory. High processing time is okay when you make a small number of parts but the larger the batch, the more important it is to minimize the time required to produce a single part. RIM technologies have the shortest processing time among all the other prototyping techniques, so the larger your batch is, the more viable this technology becomes.

As an ISO 9001: 2005 Quality System certified supplier, we are confident we can meet your requirements, please feel free to submit your CAD files here or give us a call: +86 755 2373 1920

New Allweiler mobile PCP pump unit launched

#Product Trends

New Allweiler mobile PCP pump unit launched

Circor International Inc has announced the launch of the new Allweiler AEB-1F-ME mobile progressing cavity pump unit, ideal for food and beverage market transfer and metering applications, including wine and wine mash, fruits, water, dips, sauce, juice and oils.

With the new design, the stator is always prepared for a dry run protection. The suction casing interface to the mechanical seal housing has been optimised and it now features a drain connection. The stub shaft and mechanical seal housing dimensions offer easier assembly and disassembly of the patented clamp set connection between the pump and the geared motor.

Using the long pitch geometry of Circor’s Optiflow series, the new AEB-1F-ME series is available in block design. Combined with the provided trolley, the mobile unit can be used very flexibly at different installations. It is offered in a variety of sizes, including 103, 203, 403, 553 and 703.

The AEB-1F-ME series replaces the AEB-E-ME series; spare parts for the prior model will continue to be available, including stators, joints and seals.

Mechanical Use Of Block Forming Machine

Block forming machine for the integration of Mechatronics, High-tech, high-precision modern equipment.

If the correct use and maintenance, its service life is quite long, the economic benefits followed, otherwise will attract trouble, even unpredictable consequences.

1, have trained staff, not to operate the block molding machine alone.

2. The operator must read and understand the operation Manual of the block forming machine without exception.

3. The quality, cleanliness and working viscosity of the hydraulic oil of the block forming machine determine the wood reliability of the hydraulic system of the block forming machine, as well as the efficiency, life and economy of the block forming machine. 4, block molding machine to the fuel tank when the injection should use 10 micron filtration device, absolutely do not allow no filtration device direct oil injection.

Adults 100% Polyester Portable Airline Bedding Reusable Fleece

Overview

Basic Info.

Model NO.
Blanket

Material
Polyester

Age Group
Adults

Feature
Portable

Type
Fleece Blanket

Knitting Method
Warp Knitting

Pattern
Plain Color

Usage
Home, Hotel

Transport Package
Customize

Specification
Customize Size

Trademark
non-brand

Origin
China

Production Capacity
3000000PCS/Month

Product Description

Adults 100% Polyester Portable Airline Bedding Reusable Fleece Blanket with Multi Color

 

Product Description

 

Products description: Products Name Blanket Material / Composition 100% Polyester Type Jacquard/printed/embroidery SAMPLE DAY 2-7DAYS Weight 1-1.5kgs Width Follow the customer request Brand Kangdefen or OEM Certification EN,SGS,GRS,ISO,BCSI,SEDEX Color Follow the customer request Usage Car, Lining, Home Textile, Trousers, Upholstery Weaving Process Shuttle Features of Fabric Soft,Waterproof, Flame Retardant, Anti-Static, Tear-Resistant, Heat-Insulation, Blackout, Shrink-Resistant,and follow the customer request Quality standard SGS functional Test Delivery Information: Port Ningbo / Shanghai MOQ 10000 pcs Capacity 3000000 per Month

 

Detailed Photos
  

Company Profile

FAQ
Q1: Can you provide us sample, is it free or need to pay?
A1: Free for standard items, only need to charge Express fee properly.(No need charge the express fee if you have your freight collect account like Fedex Dhl TNT)Customized samples need to charge sample fee.

Q2: What is the lead time for samples?
A2: If we are not in busy season, your ordered samples will be sent out to you about 3-10 days.

Q3: What is the lead time for delivery?
A3: In general we are able to manufacture orders of a quantity of up to a few thousand items within 15-30days since order of confirmation fixed.

Q4: Can I put my own label and logo on the products?
A4: Yes, And you also have two options as below.
(1)Send your label design to us, and we will make them for you and put them on the items.
(2)Send your finished labels to us, and we will put them on the items.

Q5: What is the minimum order quantity(MOQ)?
A5: Regarding OEM service, general MOQ of each design is 1000pcs per color, with best price. For your special request with less MOQ, please let us know, we would check with our warehouse and our fabric supplier to find a available solution. Welcome to contact us for details.

Q6: How to deliver?
A6: By sea or by air or by courier like DHL, UPS, Fedex.
 
Q7: What’s your Payment term?
A7: T/T or LC or 30% deposit before production, the 70% balance before shipping.

Q8: Where is your factory located, is it convenient to visit?
A8: Our factory located in Shaoxing city Zhejiang province, we can provide business vehicle to take you coming and departure.

IceTool Cap Can Silver

Description

Icetool Cap Can has a body made of solid aluminum and a lid out of stainless steel. Used nicotine pouches can be stored conveniently under the lid.

  • Strong and durable
  • Keeps your snus and nicopods fresh and safe
  • Made of  stainless steel and aluminum

 

Hight and Weight

Diameter 73 mm (2,9 inches)

Height 23 mm (0,9 inches)

Weight: 80 grams (2,8 oz)

 

Will Gold Be a Good Investment in 2023?

Let’s be honest, it has been quite a challenging year for gold.

There were a number of factors influencing the gold price in 2022, including rampant inflation, rising interest rates, and lingering geopolitical tensions.

As we are nearing the end of the year, you may be wondering:

What will happen to gold in 2023?

While there’s no definite answer to this question, we will try to give you an idea of where the price of gold could go next year.

In this SPOTLIGHT, you will learn:

  • What happened to the price of gold in 2022?
  • Why did gold not rally amid soaring inflation?
  • Will the price of gold go up in 2023?

So let’s start.

What happened to the price of gold in 2022?

As with any other asset, it has been a year of ups and downs for gold.

In early March, the price of gold surged above $2,000 to its highest level since 2020, as the war in Ukraine pushed investors to seek protection from rising geopolitical risks and high inflation.

Since then, however, other factors have come into play, making gold lose some of its gains. We call them the Fed effect.

The U.S. central bank has started aggressively hiking interest rates to curb stubbornly high inflation, pushing the U.S. dollar to its highest level in two decades.