Category Archives: News

Alpinestars GP Tech V2 Gloves

 

A professional Racing glove engineered to deliver superior protection, the GP Tech v2 Glove guarantees enhanced control capabilities in the most demanding conditions thanks to its innovative seamless stretch back hand construction. There is also a stretch material built with Kevlar® stretch and leather backhand for optimal flexibility, freedom of movement, reduced fatigue and sensitivity and dexterity with the bike’s controls. Another standout feature is the innovative over-injected, ergonomic, dual density, knuckle for enhanced protection against repeated impacts.

 

CONSTRUCTION:

 

  • Kangaroo palm construction with stretch insert for additional abrasion resistance in a key zone.

 

PROTECTION:

 

  • The seamless over-injected dual density knuckle cup delivers Level 2 impact protection in a compact component, while also being flexible and allowing unobtrusive hand movements.
  • Innovative seamless, over-injected ergonomic knuckle for effective impact protection.
  • The all-new ergonomically-shaped knuckle protector delivers total coverage for enhanced protection.
  • The GP DFS cuff delivers impact protection and friction control in a dual density component that is lighter, smaller and ergonomically optimized for performance riding.
  • According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: Fully CE certified motorcycling product: CE Level 2 KP.

 

KEY FEATURES:

 

  • Minimal stitching increases comfort while reducing the risk of stitching failure in the event of mechanical stress.
  • External finger seams combine the perfect blend of feel and flexibility.
  • Unrivalled flexibility combined with precise and race-proven control.
  • Stretch backhand panel for flexibility, freedom of movement, and dexterity with the bike’s controls.
  • ARshield layers on the backhand, landing zone and fingertips for additional protection.
  • Viscoelastic backhand /finger layer for protection against impacts.
  • New Cuff DFS.
  • Over injected fingertip sliders.
  • Dual closure system.
  • Palm slider.
  • Side hand reinforcement.
  • Alpinestars race finger bridge.
  • Accordion flexion zones on control fingers.

Related Products

Alpinestars Komodo Travel Bag



Skip to product compare

Alpinestars Komodo Travel Bag


Starting at
$329.95


MSRP Price
$329.95

Save 0% Off MSRP

Alpinestars Supertech R Vented Racing Boots



Skip to product compare

Alpinestars Supertech R Vented Racing Boots


Starting at
$739.95


MSRP Price
$739.95

Save 0% Off MSRP

Excel表格技巧—准确计算出两个时间之间的时间差

本教程适用版本:WPS 365 点击免费使用

对于人力资源部的工作人员来说,利用Excel表格统计员工上班时间或者上班天数是非常频繁的,那么当有两个时间时,该如何准确的计算出这两个时间的时间差呢?下面今天教大家一个小技巧。

首先,我们看到时间1和时间2,先将两个时间的格式设置准确,单击右键选择设置单元格格式:

>>免费升级到企业版,赠超大存储空间

弹出单元格格式的对话框,在分类下选择自定义,在类型里输入yyyy/m/d h:mm:ss,单击确定:

>>免费升级到企业版,赠超大存储空间

设置完毕后,单击时间差的单元格,单击右键选择设置单元格格式,弹出单元格格式的对话框,在分类下选择自定义,在类型里输入d”天”h”时”mm”分”ss”秒”,单击确定:

>>免费升级到企业版,赠超大存储空间

在时间差的对话框里,将两时间相减,如下图所示:

>>免费升级到企业版,赠超大存储空间

单击回车,我们看到两个时间的时间差就显示出来了,为6天21时31分49秒:

>>免费升级到企业版,赠超大存储空间

那么,在Excel表格当中,准确计算出两个时间的时间差的方法,是不是非常简单呢,你学会了吗?

 

Keyword: wps官网

Why Every Manager Should be a Coach, Not a Boss

Jul
02

A Caliper Talent Management article:

Why Every Manager Should Be a Coach, Not a Boss

With a coaching culture in play, employees are pushed to do their best and reach their highest potential. Caliper offers insight into how you can integrate coaching into your current strategies:

Check it out:  https://calipercorp.com/blog/why-every-manager-should-be-a-coach-not-a-boss/

Share this post:



Excel表格技巧—WPS Excel如何制作圆环图

本教程适用版本:WPS 365 点击免费使用

在我们平时使用Excel表格办公时,为了可以快速明了的显示一些数据,往往会用到一些图表。而其中圆环图是一种比较新颖且非常直观的显示方式。那么它是如何制作的呢?下面我们一起学习一下。

首先打开一个业务人员的Excel销售表:

>>免费升级到企业版,赠超大存储空间

选中A列中的姓名单元格和C列中的销售百分比单元格:

>>免费升级到企业版,赠超大存储空间

点击工具栏【插入】选项下的【全部图表】:

>>免费升级到企业版,赠超大存储空间

在弹出的对话框中,点击左侧的“饼图”,选择最后一个“圆环图”:

>>免费升级到企业版,赠超大存储空间

这样一个完整的圆环图就制作完成了:

>>免费升级到企业版,赠超大存储空间

以上就是Excel表格技巧中关于WPS Excel如何制作圆环图的技巧,是不是觉得很简单?你们学会了么?

Keyword: wps官网下载

Kelly White – Sweet Peach Strong

Description

Kelly White – Sweet Peach Strong – With a passion for fashion and a lovely lifestyle, KELLY WHITE has created their all-white nicotine pouches. That it should taste good is as obvious as that the product comes in a package you should be able to stand for in all situations.
With a product that exudes confidence and enjoyment, in slim soft pouch that sits perfectly discreet under your lip that you can enjoy everywhere, anytime.

The flavour of this pouch is Sweet Peach, a perfect choice for those who appriciate a pleasant and sweet addition to your everyday life.

FACTS

Net Weight: 10 g
Nicotine Level: 14 mg/g ( 7 mg per pouch)
Flavour Description: Sweet Peach
Number of Pouches: 20/ Can
Pouch size: Slim
Pouch Weight: 0,5 g
Texture: Moist
Available in: Single cans, Rolls (10 cans)
Manufacturer: White Industries AB

 

What is the Principle of Barrel Screw Repair?

Screw and barrel are two important parts. One is a slender threaded rod, and the other is a small and long hole. Their machining and heat treatment processes are complex, and it is difficult to ensure the accuracy. Whether to repair or replace these two parts after wear must be comprehensively analyzed from an economic point of view. If the repair cost is lower than the cost of replacing the new screw, it is decided to repair. This is not necessarily the correct choice. The comparison between the repair cost and the renewal cost is only one aspect.

In addition, it also depends on the ratio of the repair cost and the time of using the extruder screw after repair to the renewal cost and the time of using the renewal screw. The scheme with small ratio is economical and the right choice.

Ⅰ. Repair of extruder screw

1. The twisted extruder screw shall be considered according to the actual inner diameter of the barrel, and the outer diameter deviation of the new screw shall be given according to the normal clearance with the barrel.

2. The thread surface with reduced diameter of the worn screw is treated, thermally sprayed with wear-resistant alloy, and then ground to size. This method is generally processed and repaired by professional spraying plants, and the cost is relatively low.

3. Wear resistant alloy is overlaid on the thread part of the extruder screw. According to the wear degree of extruder screw, build-up welding 1 ~ 2mm thick, and then grind the screw to size. This wear-resistant alloy is composed of C, Cr, VI, Co, W and B, which increases the wear and corrosion resistance of the screw. The cost of this kind of processing is very high in professional surfacing plants. Except for the screw with special requirements, it is rarely used.

4. The repair screw can also be plated with hard chromium on the surface. Chromium is also a wear-resistant and corrosion-resistant metal, but the hard chromium layer is easy to fall off.

Ⅱ. Repair of extruder barrel

The hardness of the inner surface of the barrel is higher than that of the screw, and its damage comes later than that of the screw. The scrapping of the barrel is that the inner diameter increases due to time wear. Its repair method is as follows:

1. For the barrel with increased diameter due to wear, if there is still a certain nitriding layer, bore the inner hole of the extruder barrel directly, grind it to a new diameter, and then prepare a new screw according to this diameter.

2. The inner diameter of the barrel is machined, trimmed and recast with alloy with the thickness between 1 ~ 2mm. Then finish to the required size.

3. Generally, the homogenizing section of the barrel wears quickly. This section (5 ~ 7D long) can be bored and trimmed, and then equipped with a nitrided alloy steel bushing. The inner hole diameter refers to the diameter of the extruder screw, which is left in the normal matching gap for processing and preparation.

Enable GingerCannot connect to Ginger Check your internet connection
or reload the browserDisable in this text fieldRephraseRephrase current sentenceEdit in Ginger×

Keyword: screws phillips

Tiemoué Bakayoko: “If PSG come knocking, I will not refuse.”

Speaking in an interview with Le Parisien ahead of tonight’s crucial Champions’ League clash between AS Monaco and Manchester City, the former side’s defensive e midfielder Tiemoué Bakayoko declared his flame for PSG.

“I had a trial in an international tournament in Nîmes and we played against Arsenal. The opportunity to sign for the PSG youth academy presented itself after Montrouge. But my dad and my brother chose Rennes, the best youth academy at the time. Not going to PSG hurt me, I even had tears in my eyes… If the opportunity presents itself, I will not refuse a move to PSG. But I am only 22, and I feel very good at Monaco.”

Click Here: kilkenny gaa jerseys

BMW Aravis Air Gloves

 

Get ready for beautiful summer rides with the BMW Aravis Air Motorcycle Gloves! Our lightweight motorcycle gloves are designed to keep you safe and comfortable, with soft goatskin leather for a secure grip, finger support and knuckle protection. Additionally, the neoprene shaft keeps your wrist safe yet comfortable. The BMW Motorcycle Gloves Aravis Air – the perfect combination of comfort and safety!

 

Features

  • Light and airy summer gloves
  • Soft goatskin for excellent grip
  • Short 3D neoprene shaft with large non-slip Velcro
  • BMW Motorrad lettering on Velcro
  • Soft, integrated and large ankle protection
  • Hand edge and palm reinforced with double leather upholstery
  • Large reinforcement on palm
  • Tip of index finger and thumb suitable for operating the touchscreen
  • Material: 90% leather, 10% neoprene

Related Products

BMW Tendra 2-in-1 Gore-Tex Gloves



Skip to product compare

BMW Tendra 2-in-1 Gore-Tex Gloves


Starting at
$309.38


MSRP Price
$309.38

Save 0% Off MSRP

Scorpion EXO Vortex Air Gloves



Skip to product compare


bestsellers

Scorpion EXO Vortex Air Gloves


Starting at
$89.99


MSRP Price
$89.99

Save 0% Off MSRP

BMW Xomo Carbon Full Face Helmet



Skip to product compare

BMW Xomo Carbon Full Face Helmet


Starting at
$1,116.36


MSRP Price
$1,116.36

Save 0% Off MSRP

Dainese Corbin Air Unisex Gloves



Skip to product compare


bestsellers

Dainese Corbin Air Unisex Gloves


Starting at
$179.99


MSRP Price
$179.99

Save 0% Off MSRP

A New Fibril Structure of Amyloid β-Protein Proves Promising

Alzheimer’s is currently an irreversible brain disorder that affects memory, cognitive skills and eventually the ability to carry out even simple tasks. The cause of Alzheimer’s disease, which is the most common form of dementia, affects an estimated 44 million worldwide. While Alzheimer’s is not yet fully understood, Amyloid β-Protein (Aβ) is known to play a key role. In the case of Alzheimer’s disease, Aβ is thought to form plaques that build up in the brain resulting from the formation of aggregating fibrils.

Research led by Lothar Gremer at the Institute of Complex Systems, has unveiled a new high-resolution structure of Amyloid β-Protein (1-42) using both cryo-electron microscopy (cryo-EM) and nuclear magnetic resonance (NMR). Unlike preceding structures, conditions with a low pH were used which resulted in a new polymorph that was not previously seen. Nearly all of the R-groups are well-resolved and binding sites for monomeric Aβ were identified.  They also surmise that one mutant form, A2T (Icelandic), may disrupt fibril stability due to a more polar Threonine in place of the Alanine in the second position; whereas, A2V has a nonpolar Valine substitution which supports fibril stability. The hope is that the new structure and insight can lead to research into disrupting fibril formation, and ultimately a successful Alzheimer’s treatment. 1,2

While there is currently no cure for Alzheimer’s disease, there is much optimism that a preventative treatment or cure may one day exist with the continued research around Aβ 1-42 and other related fragments.

References:

  1. http://www.alzforum.org/news/research-news/amyloid-v-fibril-structure-bares-all
  1. Gremer, Science, (2017). [Epub ahead of print]. DOI: 10.1126/science.aao2825  

Abstract: https://www.ncbi.nlm.nih.gov/pubmed/28882996

Tagged

库里生涯第15赛季场均数据 26.4+4.5+5.1&357记三分

在北京时间8月30日,据ESPN的著名篮球记者Woj报道,现年36岁的NBA资深球员斯蒂芬-库里通过他的经纪人宣布,已经与金州勇士队签订了一份为期一年、价值6260万美元的提前续约合同。

2023-24赛季,库里为勇士出战74场常规赛,场均出战32.7分,能得到26.4分4.5篮板5.1助攻,投篮命中率45%,三分命中率40.8%,罚球命中率92.3%,场均能投进4.8个三分。

2023-24赛季,库里投进了357记三分球,高居联盟榜首。

Keyword: NBA live