Each summer I outfit my clients in the best swimsuits. Each one is tailored to my client’s needs and water lifestyle. Their activities range from kayaking and water slides to lounging by a pool they have no intention of getting into, but the requests are consistent: flatter my body. I have also been asked about minimizing tan lines, supporting the breasts, emphasizing the breasts, and general style wishes. Some of my favorite requests are for stylish, sporty looks for my more active clients. Below are the best swimsuits I have put on my clients this month. I will be updating this post with all my amazing finds throughout the summer.

Miraclesuit Crisscross One-Piece Swimsuit

This Miraclesuit Crisscross One-Piece Swimsuit is beloved by many women who desire the most slimming look possible. It is best suited for the less busty.

Sizing Tip: Runs small, order one size up.

Uniqlo Women Long-Sleeve Rash Guard

I adore this Uniqlo Women Long-Sleeve Rash Guard. It is as flattering as it is stylish. I will be using this for colder days in the water and sun protection on hotter water sports days. This suit is super thin and lightweight making it incredibly comfortable. I wear it without anything underneath, but I have recommended a white bathing suit top to my clients who want a thicker cover over their breasts.

Sizing Tip: Runs small, order a size up.

Trina Turk Flutter Bandeau Bikini Top

This Trina Turk Flutter Bandeau Bikini Top can be bad for tan lines on your arms, but it’s a great look. It hides inner arm issues and armpit fat. This top is available at Nordstrom, Neiman Marcus, Bloomingdale’s, and Dillard’s.

Sizing Tip: Runs true to size.

Trina Turk Studio Solids Bikini Bottoms

The ruching on this Trina Turk Studio Solids Bikini Bottoms is fantastically flattering on your hips. These bottoms are available at Nordstrom, Bloomingdale’s, and Dillard’s.

Sizing Tip: Runs true to size, but I always like to compare with a size up when it comes to bathing suits.

J.Crew Plunging Halter Swim Dress

For those in need of a more conservative look, this J.Crew Plunging Halter Swim Dress is very flattering.

Sizing Tip: Runs true to size, but order a size down if you want to compare two sizes.

Luli Fama ’Wavy’ Brazilian Side Tie Bikini Bottoms

I love Luli Fama ’Wavy’ Brazilian Side Tie Bikini Bottoms for their flattering behind. Bottoms with the ruched center seam create a perky shape for the bum and prevent drooping over the years. Bottoms without the ruched center seam tend to get baggy after years of chlorine, salt water, and washings. These bottoms are available at Nordstrom, Zappos, and Amazon.

Sizing Tip: I always order a larger size to get more front coverage. I make up for the larger size by tying the strings tighter.

Rye Oh My Bikini Top

This Rye Oh My Bikini Top is one of the most flattering and edgier bikinis this season. It makes your breasts look fantastic. This top is available at Nordstrom and Shopbop.

Sizing Tip: Runs a little small, order your usual size as well as a size up to compare.

Rye Oh My Bikini Bottoms

The sides of this Rye Oh My Bikini Bottoms are super flattering. They are available at Nordstrom and Shopbop.

Sizing Tip: Runs small, order a size up.

Becca ‘Color Code’ Triangle Bikini Top

The indigo shade of the Becca ‘Color Code’ Triangle Bikini Top is wonderful on all skin tones. The style of the bikini top is also flattering, sexy, and creates the least amount of tan lines, as well as the most flattering tan lines. This top is available at Nordstrom, Zappos, and Bloomingdale’s.

Sizing Tip: Runs true to size.

Becca Color Code Tie Side Pant Bottoms

The Becca Color Code Tie Side Pant Bottoms in matching indigo are high quality with a nice thickness — and the side tie prevents muffin tops.

Sizing Tip: Runs true to size.

O’Neill Highway Stripe One-Piece Swimsuit

This O’Neill Highway Stripe One-Piece Swimsuit makes your breasts look amazing and slims your torso. It’s great for a sporty, sexy look. This swimsuit is available at Nordstrom, O’Neill, Macy’s, Zappos, and Amazon.

Sizing Tip: Runs true to size.

Vix Swimwear San Andreas Ripple Bikini Top

The Vix Swimwear San Andreas Ripple Bikini is very flattering. A tie bottom is always the most flattering option because it doesn’t cut into fat, and a triangle top creates the longest line for your torso.

Sizing Tip: Runs true to size, but order a size up if you want more coverage.

Becca ‘Color Code’ Triangle Bikini Top In Raisin

This burgundy shade of the Becca ‘Color Code’ Triangle Bikini Top is so rich and unique. It also gives a little more coverage than other triangle bikinis.

Sizing Tip: Runs true to size.

Becca Color Code Side Tie Bikini Bottoms

The Becca Color Code Side Tie Bikini Bottoms in matching burgundy are the same style as the indigo ones mentioned above. The string ties and thicker fabric are very flattering.

Sizing Tip: Runs true to size, but order a size larger for more coverage.

Miraclesuit One-Piece Swimsuit

The Miraclesuit One-Piece Swimsuit is the best option for bustier women who desire the most slimming one-piece suit.

Miraclesuit Bell Rives Charmer One-Piece Swimsuit

I adore this fresh Miraclesuit Bell Rives Charmer One-Piece Swimsuit. It’s great for a busty woman wanting to have some fun with her swimsuit, while achieving a slim look. This swimsuit is available at Nordstrom, Zappos, and Amazon.

Tory Burch Costa Smocked Bandeau Bikini Top

Hate those string tan lines? This Tory Burch Costa Smocked Bandeau Bikini Top is great for a strapless look that stays put and gives you coverage. This top is available at Neiman Marcus.

Sizing Tip: Runs true to size, but depending on the coverage you want, order a size up or down to compare.

Tory Burch Costa Smocked Hipster Bikini Bottoms

These Tory Burch Costa Smocked Hipster Bikini Bottoms are another flattering option that does not involve tying a string. They are available at Bloomingdale’s, Shopbop, and Neiman Marcus.

Sizing Tip: Runs small. Order a size or two up.

J.Crew U-front Bandeau Bikini Top In Liberty Alpine Pasture

I love this J.Crew U-front bandeau bikini top in Liberty alpine pasture for laying out and preventing décolletage tan lines. The matching string bikini bottoms are almost sold out, but you can pair this with a solid colored green or navy bikini bottom of your choice, like Luli Fama’s Wavy Brazilian Side Tie Bikini in green, aka ‘armed and ready.’

Miraclesuit Breakers Sanibel One-Piece Swimsuit

This Miraclesuit Breakers Sanibel One-Piece Swimsuit is another great option for women who want coverage and slimming in their swimwear. The sweetheart neckline flatters so many body tops. This suit is available at Nordstrom and Zappos.

Sizing Tip: Runs small. Order a size up.

通过访问 Instagram API，您可以跟踪标签、查看 Instagram Business 账户的表现、收集提及数据以衡量受众对品牌的态度、在网站上发布 Instagram 照片等。

在本指南中，我将向您介绍 Instagram API 的定义、常见用途示例以及如何使用 API 为您的业务带来好处。

什么是 Instagram API？

Instagram Graph API 允许您将自己的应用程序与 Instagram 的特性和功能连接起来。Instagram 企业和创作者可以使用此 API 全面管理他们在 Instagram 上的存在，包括查找提及、获取其他企业的基本数据以及查找有标签的照片。

为了保护数据隐私，Instagram 关闭了其公共 API，取而代之的是控制性和限制性更强的 Graph API。需要注意的一个主要变化是，你需要一个 Instagram Business 账户才能使用新的 API 收集数据。

“如果你是一个想在 Graph API 基础上进行开发的开发者，你会发现有一系列功能可供使用。一旦获得Instagram的批准，你就可以创建让用户更轻松、更有趣的应用程序。您还可以考虑将 API 与您的网站整合。

有了这个 REST API，社交媒体管理者们仍然需要第三方应用程序，允许他们能够使用自己的企业账户发布信息和进行互动，并分析发布信息的效果。因此，如果你想建立一个Instagram应用程序，现在正是时候。

Instagram 基本显示 API

Instagram基本显示应用程序接口可让您轻松访问Instagram的数据。您可以用它来获取 Instagram 用户的基本信息和相关数据（如评论、媒体、标签和 Stories）。它与 Instagram Graph API 的不同之处在于，它不是为企业管理其在 Instagram 上的存在而设计的。

Instagram API Key

与大多数开放式 API 一样，Instagram API 也要求你拥有一个独一无二的密钥，然后你就可以用这个密钥在你的网站或应用程序上访问 API 的特性和功能。

Instagram Graph API 将其密钥称为 “用户访问令牌”。您可以在访问 API 的过程中创建用户访问令牌。下面我们将详细介绍这一过程。

如何访问 Instagram Graph API

要访问 Instagram API，您需要准备几样东西：

• 一个 Instagram 企业或创作者账户
• 你拥有并运行的与该账户相连的 Facebook 页面
• 一个 Facebook 开发者账户（以下是注册方法）
• 一个已注册的 Facebook 应用程序，该程序由你拥有并运行，且已进行了基本设置（以下是如何设置 Facebook 应用程序的方法）

如果你已经拥有了这些，那么现在就是访问 Instagram Graph API 的时候了。

1. 前往 Facebook 应用程序的 “应用程序控制面板”。
2. 在侧边栏上，点击 “产品 ”按钮，旁边有一个加号。

3. 点击 Facebook 登录产品卡上的 “设置”。
4. 输入 Facebook 登录设置。确保所有选项都设置为默认。

5. 使用 Facebook 登录文档，根据目标设备（iOS、Web、Android）在应用程序中实现 Facebook 登录。
6. 在实现过程中，将其配置为请求这些权限：
   instagram_basic
   页面显示列表
7. 返回应用程序，使用 Facebook 账户登录。确保同时登录了 Facebook 开发者账户。

8. 点击 “确定”，为你的应用赋予之前设置的 instagram_basic 和 pages_show_list 权限。
9. 全部完成！你应该会在屏幕上看到一个用户访问令牌。

然后，你就可以使用此访问密钥检索用户页面、Instagram Business 账户和媒体对象。更多详情，请查看 Facebook 的 Instagram Graph API 教程。

Instagram应用程序接口沙盒模式

沙盒模式是一种测试环境，您可以在发布网站或应用程序之前测试 API 调用。

当您完成将应用程序或网站连接到Instagram API的过程时，您首先需要进入沙盒模式。这是使用 Instagram API 的必要步骤。您将有机会进行以下操作：

• 确保 API 调用工作正常。
• 让 Instagram 有机会审查您的应用程序或网站集成。

沙盒模式是发现集成中的错误和缺陷的好地方。

Instagram API 控制台

控制台是一个环境，开发人员可以在其中输入示例命令进行测试，并查看结果。

Any API 的 Instagram API 控制台就是这样一个例子。你可以使用这个工具对 Instagram API 进行实时 API 调用并进行测试。

接下来，让我们看看 Instagram API 的一些示例。

Instagram应用程序接口示例

以下是 Instagram 应用程序接口的一些使用示例。

1.Instagram Stories API 示例： Insta-Stories.online

Insta-Stories.online使用Instagram API从Instagram公共账户中提取故事。您可以匿名浏览，无需登录。

Insta-Stories.Online使用Instagram基本显示应用程序接口的以下功能：

• GET /{media-id}
• GET /{user-id}/media

2.Instagram 分析 API 示例： Minter.io Instagram 分析

Minter.io 的 Instagram 分析工具提供有关 Instagram 性能指标的数据。您可以用它将分析数据输出到各种界面，以方便报告。

Minter.io使用Instagram Graph API的以下功能：

• Insights

3.Instagram 媒体 API 示例： Inflact Instagram 媒体下载器

Inflact的Instagram媒体下载器是一款适用于Instagram、Facebook、Twitter和Twitch的媒体下载器。它使用 Instagram API 让你从 Instagram 下载内容资产。

Inflact Instagram 媒体下载器使用 Instagram 基本显示 API 的以下功能：

• GET /{media-id}

4.Instagram Hashtag API 示例： Instagram的Inflict标签生成器

Inflact的标签生成器可让您轻松快速地为社交媒体帖子生成标签。它可以根据从应用程序接口获取的数据，帮您想出成千上万个相关创意。

Inflact标签生成器使用Instagram Graph API的以下功能：

• Hashtag Search

5.Instagram Feed API 示例： Instagram 应用程序

App for Instagram 是一个 Chrome 浏览器扩展，它使用 Instagram API，让你可以直接从浏览器浏览你的信息源、DM 其他用户和查看其他用户的资料。

App for Instagram 使用 Instagram 基本显示 API 的以下功能：

• GET /oauth/authorize
• GET /{user-id}
• GET /{media-id}

如何使用 Instagram API

1.深入了解您的业务。
2.从特定标签中提取数据。
3.建立你的追随者。
4.查看全球和特定地区的流行趋势。
5.创建促销活动。
6.在网站上添加 Instagram 照片。
7.监控活动或宣传效果。
8.创建实时馈送。
9.自动打印照片。
10.用 Instagram 照片装饰物品。
11.管理评论。

现在，您可以访问 API，根据您的业务目标，您可以用它做很多事情。以下是使用 Instagram API（图谱 API）的几种方法。

1.深入了解您的业务。

如果你想知道如何营销你的业务，你需要知道你在哪些方面取得了成功，哪些方面需要改进。Instagram API 将允许你在整个平台上获取任何关于你业务的提及–无论好坏。

如果你拥有一家餐厅，你可以看到人们对哪些菜品赞不绝口、拍了最多的照片，或者用呕吐表情符号标记了哪些菜品。如果你经营一个活动空间，你可以看到客户如何在空间内进行创新。然后，你就可以推销你的场地的特殊灵活性，让潜在的租用者更好地了解如何使用它。

如果你提供一种产品，你可以看到人们在现实生活中是如何使用它的。你还可以看到对用户体验产生负面影响的用户错误模式。这将帮助你提出解决方案来教育用户，或使下一个版本不会出错。

适用功能

• Insights

2.从特定标签中提取数据。

使用 Instagram API 查找特定标签的数据，从特定标签中提取图片，并实时发布到网站上。这对于向网站访问者推广社交媒体账户非常有用。

同样，您也可以利用这一功能来展示大量的粉丝或高水平的参与度。这是社交证明的一个要素，对企业的成功至关重要。

您还可以使用 Instagram API 查找自己或竞争对手的标签并评估其表现。

例如，如果你去年成功开展了一次假日活动，你可能想提醒你的团队当时人们都在说些什么。浏览竞争对手的社交媒体也能为自己的营销活动提供有用的见解。

适用功能

• Hashtag Search

3.建立你的追随者。

虽然我们不建议使用 Instagram 机器人根据用户使用的标签自动点赞、评论和关注用户–这违反了 Instagram API 的使用条款，也是让你的账户被关闭的好方法–但我们建议使用 API 为你的品牌找到合适的粉丝。

像机器人一样手动操作。但是，利用人类的推理能力，特别注意那些可以成为你的非官方品牌大使的 Instagram 用户。他们应该是与你的品牌互动最多的用户，在正确的位置，并且拥有自己的粉丝。他们可以向他们的粉丝推广你的品牌，进而增加你的粉丝数和品牌影响力。

适用功能

• Insights
• Mentions

4.查看全球和特定地区的流行趋势。

Instagram API 可让用户提取最受欢迎的内容，您可以利用它进行研究、收集营销见解或在网站上发布相关内容。

您还可以根据内容发布的地理位置提取内容。使用地理标签搜索时，您可以看到特定地点的热门内容，并持续获得实时更新。

如果您的营销活动针对的是某个特定地点，这将非常有用。如果您想关注全球各地发生的事情，只需搜索您感兴趣的地点即可。

例如，TagFinder.com 使用 Instagram API 按城市或国家显示最常用的标签。拉斯维加斯的热门标签之一是 #LosAngeles，这意味着如果你想成立一家洛杉矶旅游公司，拉斯维加斯可能是一个极佳的市场拓展地点。

适用功能

• Hashtag Search

5.创建促销活动。

您可以设置一个比赛，鼓励人们拍摄您企业的活动照片，并使用 Instagram API 根据您设置的标签提取每张照片。您可以在 Instagram 和网站上展示入围的最佳照片。让你的受众通过点赞 “投票 ”选出优胜者。

您将同时提高参与度，并获得大量精彩的照片，在今年余下的时间里发布在您的网站和社交媒体平台上。

适用功能

• Hashtag Search

6.在网站上添加 Instagram 照片

无论是否是竞赛的一部分，如果您想将您在 Instagram 上发布的照片添加到您的网站上，Instagram API 都能为您提供便利。您可以发布已有的照片，也可以设置一个照片流，在照片上传到平台时自动添加。

这些照片可以来自特定用户的账户或标签。你可以利用这一功能创建一个来自 Instagram 企业账户的照片库。这不仅有可能提高网站的美观度，还能宣传你的产品，鼓励网站访问者关注你的社交媒体账户。

还可以考虑使用 Instagram API 添加所有营销活动中的图片，包括粉丝和其他参与者的照片。

适用功能

• Hashtag Search
• IG Media
• IG User Media
• User Media (Instagram Basic Display API)

7.监控事件或活动绩效。

由于可以根据标签和地理标签提取内容，因此还可以使用 Instagram API 监控活动或事件。通过查看照片，你可以了解用户对特定产品、服务或话题的反应。如果是与会者分享的活动，你可以通过他们的发言来判断活动的受欢迎程度。

适用功能

• Insights
• Hashtag Search

8.创建现场直播。

Instagram应用程序接口提供的访问权限还允许您展示您的活动或营销活动。如果你是场地所有者，你可以用它来展示你的客人在活动中度过的美好时光，鼓励其他人向你预订。

如果你正在开展营销活动，你可以创建一个用户生成内容的实时馈送，鼓励更多的人参与进来，最终提高你的品牌知名度。

适用功能

• Mentions
• Hashtag Search

9.自动打印照片。

如果你需要打印 Instagram 上某个事件或标签的照片，Instagram API 可以帮你实现。通过配置 API，可以自动打印你上传的任何照片或以特定标签发布的照片。

您可以使用 Instagram API 创建一个有趣的拼贴图，将每天特定时间段拍摄并上传的照片拼贴在一起，或者在活动结束时将带有特定标签标题的照片拼贴在一起。

适用功能

• IG Media
• IG User Media
• Hashtag Search

10.用 Instagram 照片装饰物品。

将 Instagram 照片印制在手机壳、明信片和马克杯等物品上，进一步将照片带到线下。这是让客户脸上露出笑容的好方法。例如，给 Instagram 比赛的优胜者颁发证书，上面印有所有参赛者的拼贴照片。

适用功能

• IG Media
• IG User Media
• Hashtag Search

11.适度评论。

Instagram Graph API 为您提供了在 Instagram Business 个人资料上管理评论的高级功能。使用它可以隐藏或取消隐藏评论、删除评论、检索对评论的回复尤其适用于了解有关您的品牌或活动的长篇背靠背争论、回复评论以及禁用或启用评论。您不必再通过 Instagram 消费者应用程序来确保您的评论能代表您的品牌。

适用功能

• Comment Moderation

利用 Instagram API 实现更好的发展

Instagram Graph API 为您提供了 Instagram 日常用户无法获得的访问权限。作为创意企业主或营销人员，有很多方法可以利用它来发展品牌。请使用本指南，充分利用您的努力，让您的品牌成倍增长。

原文链接：https://blog.hubspot.com/website/instagram-api-examples

Basic Info.

Model NO.
bl010

Material
Polyester

Age Group
Adults

Feature
Anti-Pilling, Portable

Type
Chemical Fibre Blanket

Knitting Method
Machine Weaved

Pattern
Plain Color

Usage
Home, Travel, Airplane, Picnic, Hospital, Hotel

Transport Package
Sea Carton

Specification
on request

Trademark
customizable

Origin
Nanjing

HS Code
6505009900

Production Capacity
200000/Month

Packaging & Delivery

Package Size
50.00cm * 40.00cm * 55.00cm

Package Gross Weight
20.000kg

Product Description

Blanket MATERIAL Polyester ( As per your request ) STYLE Plain SIZE 80*130cm ( As per your request ) COLOR As per your request    MOQ 300pcs Small trial order can be acceptable. LOGO As per your request Printing, Flat embroidery,3D Embroidery,  Applique embroidery, Leather patch, Woven patch, Metal patch, Felt applique ect. , PRICE TERM FOB SHANGHAI Basic price offer depends on final cap’s quantity and quality PAYMENT TERM T/T/Western Union SAMPLE CHARGE Sample fee is free SAMPLE TIME Within 7 working days PRODUCTION LEAD TIME 30-60 days approx after pre-production samples confirmed, special time based on bulk quantity SHIPPING METHOD By sea or air or express, as per orders request SUPPLY ABILITY 200000pcs per month

Basic Info.

Model NO.
22W1-38953.02

Material
Polyester / Cotton

Age Group
Babies

Feature
Anti-Pilling, Wearable

Type
Baby Blanket

Knitting Method
Stitch Knitting

Pattern
Printing Pattern

Usage
Home, Travel, Airplane, Picnic, Bath, Hotel

Transport Package
10PCS/Bag

Specification
70*70CM

Trademark
Y and P

Origin
China

HS Code
6301300000

Production Capacity
900000pieces/Year

Product Description

Dalian Duojia Trade Co., LTD established in 2003. It is a professional children’s wear company which combines of design, research, production and sales. The main products mainly include knitted children’s wear, matching with woven wears, woolen wears and so on.

Products are mainly sold to Italy, Spain, Canada and many other countries. Our company pursues the business philosophy of “customer first, reputation first, integrity and pragmatic, the pursuit of excellence”. The famous Italian brands IDEXE, CHICCO, Spain- MAYORAL and Canada-Gold Tulip/Amouire/All Navy have been established a long time cooperation with our company.

With high quality fabric and accessory at home and abroad, sincere service for customers, carefully design each product, deeply trusted and praised by customers, our company has already became the appointed supplier for some internationally renowned brands. The company’s annual capacity of kinds of baby clothes is about 3 million pieces. The annual export earnings is about 9 million US dollars.

Dalian Duojia Trade Co.,Ltd owns two professional garments factories which are Yingkou Yijia Garment Co., Ltd and Dandong Huijia Garment Co., Ltd. There are more than 400 experienced sewing workers now. Factories focus on “people-oriented”, all staff follow strictly the concept of “sincerity first”. With experienced professional technical personnel, international advanced equipment, closed production process and strictly product quality control system, we can guarantee the high quality of products.

Dalian Duojia Trade Co., Ltd wish to cooperate with foreign customers sincerely. We’ll provides high quality products and best service. We hope we can open co-existence, co-prosperity and win-win business model and create a better future together.

 

Almost everyone sends or receives gift cards in the world today, which has proven how popular and widely acceptable gift cards have come to be. The benefits people reap from gift cards, in general, have made it possible for scammers to venture into the business. These cyber fraudsters have developed some common tactics to prey on their victims and this article has done justice to some of these tactics, to help you stay safe and away from these cyber attackers who have sworn to make a huge living from the vulnerable gift card users.

What Makes Gift Cards So Attractive To Scammers?

1. They’re easy for consumers to purchase, online or in-store
2. Most retailers and big  brands now offer some form of gift card
3. There are fewer protections for gift cards than  regular payment cards
4. There’s no need for a bank account for payment, the scammer just needs the gift card pin/code

5 Common Gift Card Scam Tactics You Should Know

1. You won a Prize:

This type of fraud exploits the promise of a reward to get the customer to pay a fee through a gift card. The victim will receive unsolicited contact from the fraudster informing them that they have won a big prize but must pay a minor fee to claim their award. It may be anything from a car, a house, or a vacation but there is never any cash reward.

2. Phishing attempts to steal your personal information:

Gift cards can be used to deceive people into divulging their personal information. The receiver is solicited via email, SMS, or social media with the prospect of a huge gift card balance, similar to a traditional phishing assault. To claim it, customers must provide some personal and perhaps financial information, which the fraudster will either sell on the dark web or use for identity theft.

3. In-store card manipulation:

Scammers aren’t limited to the internet. Another common ruse is to go to stores that sell gift cards and take the numbers/secret PINs. They’ll go to great measures to conceal their activities, such as recovering PINs using a sticker. They may wait until the victim goes online to register and load funds onto the card before using it online or manufacturing a duplicate for in-store usage, depending on the card.

4. Using bots to steal your balance:

The bad guys may go right to the source and look for a digital record of your gift card with the issuer. What are their methods for accomplishing this? By probing bank-end IT systems at merchants and other organizations for information on card balances and numbers with automated bots. They can use the card as if they were the official cardholder with this information.

5. A threatening official demand payment:

Someone claiming to be from the Federal/State Inland Revenue Service(FIRS/SIRS), the police, or another government entity may call you. Hang up if this caller tries to scare you into buying gift cards to pay for back taxes or other legal issues. This caller is a scammer. Even if the caller is aware of your secret documents and reads them out loud, this is a hoax. The caller may become angry or insulting, threatening to arrest you or suspend your business or driver’s license. To address tax or other legal difficulties, the FIRS, police, or any other government institution will never accept payment in the form of gift cards.

To avoid these cyber fraudsters, you should take note of these strategies which they usually deploy on their targets. It is important to note that no government agency will ever ask you to make payment with gift cards, so any of such requests you may get is a scam. It is also important to keep your gift card codes secret to avoid divulging them carelessly to criminals.

Read also: 5 common google play gift card scams

 

My wardrobe is a sea of chic. I have the perfect dresses for client meetings, fantastic frocks for cocktail events, fabulous leather skirts, cutting-edge blazers and a rack dedicated to exquisite silk garments. This is all well and good for my career as a personal stylist, but is of no help for a hot summer day off with loved ones. For the past five summers, I was only slightly aware of this large summer casual gap in my wardrobe because I work so darn much, but this summer’s itinerary brought it to attention. With my trips to Spain and Malta in mind, I created a very comfortable-casual-cool summer wardrobe. Nothing elegant about it, as you can tell from my favorite look we photographed in Menorca, Spain.

Best Denim Cutoff Shorts

Interestingly enough, my favorite addition to my comfortable-casual-cool summer wardrobe is my Rag & Bone ‘Freeport’ denim cutoff shorts ($165). I have not owned and operated denim cutoffs in a loooong time. It was weird making the decision to pursue and purchase a garment I associate with my much younger, much more fun self, but that’s the point. I want to have more fun. I have been too fancy, too articulate, and too busy for too long. I want a garment that says, “Hey! I’m having fun. I’m freakin breezy.”

Finding the best denim cutoffs shorts for me was a thorough process.  Here were my requirements:

1. Big enough in the waist with slim leg openings. (I have a wide-ish belly and slim legs.)
2. Short, but not too short. (Aka hides the collection of flesh that sits at the top of my inner thighs, while still exposing as much skin as possible to the sun.)
3. The perfect medium blue wash for a versatile worn in look.

I tried on about 10 denim shorts before finding the best denim cutoff shorts. Some great runners up to my favorite shorts include Treasure & Bond’s cuffed denim shorts ($68), Joe’s rolled denim shorts in Genna ($98), and Rag & Bone’s distressed cutoff shorts ($180). Sizing note: the Rag & Bone is running a bit big. Order one size down.

Breezy Summer Top

Perhaps you’ll will find this gross, but I wore this sleeveless Paige top almost everyday. If I didn’t wear it out and about, I wore it to bed. It is made of super light cotton, and I adore the feel of it. I feel sexy, light and relaxed in it. Plus it goes with everything. I tied it in a knot, as pictured, with a sarong, my stretchy light grey Loft skirt, and obviously with my denim cutoff shorts. You can also tuck it into jeans or throw it over a bikini. This top is magic to me. It epitomizes my new summer persona.

Calaphya Silk Scarf

The best part of this outfit is the Calaphya silk scarf tied around my wrist. Without it, I am just another lady in cutoff shorts. Beyond the unusual placement of the scarf, the 35 x 35 Risen Scarf is unique in and of itself. It is digitally printed with a dream like bird that extends out into pastel and jewel tone feathers, waves and shapes. As Calaphya touts, the scarf is art.

White Rhea Non-Slip Flip-Flops

I was delighted when Rhea sent me the Eva White non-slip sandals right before my trip to Spain. A white sandal is like a white top: they go with absolutely everything. The white flip-flops were a fantastic asset to this trip. Besides their versatility, they practically repel dirt and are truly no-slip. I tested their tread thoroughly by climbing all over these rocks and on the slippery tile by the pool in our villa. I am incredibly impressed by the cushion, the flexibility, and the discreet look of Rhea’s effective tread. My only issue is its comfort endurance. After a few hours of walking, the straps rubbed a spot red on both sides of my feet.

The Accouterments

I recently put this Nadri earring on a client and had to have it for myself as well. I love to pair it with my Nadri ‘Geo’ pendant necklace. The addition of the bling to this laid back look is perfection. I have always loved the saying, “diamonds and denim.” It’s a lovely juxtaposition that makes me feel dressed up even when I’m dressed down. To compliment these jewels, I added my Melinda Maria ring, Alexis Bittar cocktail ring, and my Kris Nations bracelets. I topped it all off with the retro inspired Marc Jacobs sunglasses.

Photography by David McClory

My blog posts are my honest and personal opinion. Sometimes my content includes products sent from companies or PR firms. In this case I was sent samples from Rhea and Calaphya. If I am sent something that is unimpressive or boring I don’t write about it.

I love camel-colored pants for fall and winter. Camel pants can be elegant and chic, sure, but they can also be fun. Below I have everything from leather leggings to wide-leg jeans. And of course, I have the classic camel ankle pants and silky wide-leg trousers. Once you select the camel pants that make sense for your wardrobe and lifestyle, head on over to my post What Colors Go Well With Tan Pants to learn what tops to pair with them.

Toad & Co Balsam Cutoff Pant

I absolutely love how comfortable and flattering these pants are! You can see me wearing the blue pair in one of my Daily Looks.

Available at Toad & Co and Zappos.

Sizing: 00-14

Material: 99% organic cotton, 1% elastane

Commando Faux Leather Legging

Commando’s Faux Leather Leggings are a great high-quality faux leather option. They are available at Saks 5th Avenue, Revolve, Amazon, Bloomingdale’s, and Zappos.

Sizing: XS-XL

Material: 55% polyurethane, 44% viscose, 1% elastane

PAIGE Anessa Patch Pocket High-Rise Wide-Leg Jeans

These camel-colored jeans are perfect for my more casual gals. They are available at Anthropologie, PAIGE, and Nordstrom.

Sizing: 23-34

Material: 93% cotton, 5% polyester, 2% elastane

Frame Relaxed Wide-Leg Trousers

The single greatest innovation in the 20^th century for improving plastic injection molding comes from one of history’s original and most basic machine types: the screw. Let’s take a closer look at the ingenious application of this simple design and how it improves the plastic injection molding process.

How Was Plastic First Injected?

Prior to the 1950s, all injection molding was done with a relatively simple barrel and plunger system. The solid plastic pellets were simply heated in a barrel using a basic temperature control system. When the plastic became sufficiently liquified by heat, a plunger pushed the molten plastic through the barrel and into the mold. But this technique had many drawbacks.

What Were Some of the Drawbacks of the Early Injection Molding Machines?

The main problem with the original design was the uneven distribution of heat throughout the molten plastic. To get the interior mass of the plastic up to injection temperature, more heat was applied to the walls of the barrel. Conducting this heat uniformly was difficult to do consistently and there was always a risk of overheating the external mass. And when plastic is kept too hot for too long it rapidly degrades.

To overcome this, plastic was kept cooler in the barrel to avoid degrading, and therefore required much higher injection pressures and much longer injection cycles. Both of these compromises introduced constraints in the design of the tooling and the finished products made from them, as well as of the chemical constituency of the plastic raw material itself.

When Were Reciprocating Screws Introduced Into Injection Molding Machines?

Reciprocating screws were developed in the mid-1950s and by 1960 they quickly began to supplant the older systems in Europe and the United States. The great advantage of the reciprocating screw design is that it helped to manage temperature in three critical ways.

How Did the Reciprocating Screw Eliminate the Core Heating Problem?

Because the screw runs through the center of the barrel on an injection molding machine, it displaces the inner core of raw material, thereby eliminating one source of unequal heating.

Without the core being overheated, there is less danger of the plastic degrading during processing. 

What is the Purpose of the Flights on the Reciprocating Screw?

The flights on the reciprocating screw perform several important functions.

First, they help to move the plastic through the barrel. As the pellets are fed from the hopper into the barrel the screw is rotated, driving the material forward while more pellets are added.Secondly, the flights provide a continuous mixing action that distributes heat evenly throughout the mass.

Not incidentally, this mixing also helps to purge the mechanism of different material and color left behind from any earlier production run on the same machine.

How Does the Reciprocating Screw Help to Heat Plastic Resin?

The reciprocating screw is responsible for providing the majority of heat to the thermoforming plastic. This is because the diameter of the screw increases as it approaches the tip. Plastic pellets being pulled along by the flights are compressed into a tighter space and sheared, or cut, by the action of the turning flights. This action creates friction that mixes the pellets to a uniform consistency and heats them to the proper temperature.

By the time the plastic reaches the tip, 60% ~ 90% of the heat required to melt it has come from the screw, not the heated barrel.

How Does the Reciprocating Screw Hold Consistent Injection Pressures?

The final advantage of the screw comes in the form of a check ring that maintains consistent pressure at the tip of the screw where it enters the nozzle.

When enough molten plastic has filled the barrel in front of the tip, the reciprocating screw is plunged forward to inject the resin into the mold.As the mold fills it will try to resist this compression, which forces the check ring back against the thrust ring. This effectively locks off any back pressure so the screw can now fully pack the mold.

Are All Reciprocating Screws Made Alike?

Bi-metal reciprocating screws resist the deteriorating effects of abrasive plastic like polystyrene or corrosive plastic such as PVC, which can potentially produce chlorine gas as it’s heated. Bi-metal screws are more expensive but they’re much more durable and will keep production machines running longer without downtime for maintenance. Also, as screws wear down over time this will adversely affect temperature and pressure within the barrel. Bi-metal screws are better able to maintain process control parameters for consistent production.

For such a humble device, the reciprocating screw provides enormous advantages that we’ve learned to rely on over the years. Want to know more? Our team is standing by to help with your next plastic injection molding project when you contact us for a free quotation.

*Images courtesy of engineerguy@youtube.com, under Creative Commons Share Alike license 3.0.  

---

Posted on April 12th, 2019 | By Judy, WayKen Project Manager

The show is always better than the words, the experience is the kingly way. Although skipping prototyping during the design process can save some time, it is likely to waste more time during the development process. If people are used to trying before buying pants, and trial run before buying a car, then it would be sensible to test your design with prototype parts before the development phase.

CNC Machining for Prototype Parts

There is no single answer as to how to make a prototype and which process to use. The following describes a process that is primarily used to process prototypes in the rapid prototyping field – CNC machining. It is different from 3D printing, and it is subtractive manufacturing. Usually, the supplier gets a project and goes through the following steps.

1. Analyze the processing drawings and determine the processing

According to the processing drawings provided by the customer, the staff can analyze the shape, dimensional accuracy, surface roughness, workpiece material, blank type, and heat treatment status of the part. Then select the machine tool, the tool, determine the positioning and clamping device, the processing method, the processing sequence, and the amount of cutting.

In the process of determining the machining process, the instruction function of the CNC machine tool used should be fully considered, and the efficiency of the machine tool should be fully utilized to achieve a reasonable processing route, a small number of passes, and a short processing time.

2. Reasonably calculate the coordinate value of the tool path

According to the geometrical dimensions of the machined parts and the programmed coordinate system, the motion track of the center of the path is calculated to obtain all the tool position data. Generally, the numerical control system has the functions of linear interpolation and circular interpolation. For contour processing of flat shapes with simple shapes (such as parts composed of straight lines and circular arcs), only the starting point, end point, and arc of the geometric elements need to be calculated. The center of the circle (or the radius of the arc), the intersection of the two geometric elements, or the coordinate value of the tangent point.

If the CNC system has no tool compensation function, the coordinate value of the motion path of the tool center is calculated. For parts with complex shapes (such as parts consisting of non-circular curves and curved surfaces), straight lines (or arc segments) are required to approximate the actual curve or surface, and the coordinates of the nodes are calculated according to the required machining accuracy.

3. Write part CNC machining program

According to the tool path of the part, the tool movement track data and the determining process parameters and auxiliary actions are calculated. The programmer can program the parts according to the function instructions and block format specified by the CNC system. At the time of writing, it should be noted that: first, the normativeness of program writing should be easy to express and communicate; secondly, on the basis of the full familiarity with the performance and instructions of the CNC machine tools used, the techniques used in each instruction and the skills of programming the program segment.

4. Purchase materials

The general machining materials are metal and plastic. The metal is mainly aluminum, stainless steel, sheet metal, magnesium alloy, titanium alloy and the like. Plastic materials are ABS, PMMA, PC, PP, POM, etc.

5. CNC machining process

The first step in processing the material onto the machine is rough cut. Roughing should use a larger knife as much as possible to quickly remove a large amount of workpiece material with a large amount of cutting within the range of machine power or tool tolerance. In order to prevent the workpiece from loosening due to the cutting vibration during rough machining, it should be checked in time after opening and re-aligning if necessary.
For workpieces with complex cavities, because of the large tool used for opening and roughing, a large amount of residual space remains in the corners, and it is necessary to perform secondary roughing or clear-up corners with a tool smaller than that in roughing. When the machining area is relatively large, semi-finishing can be performed to reduce tool loss.
In order to prevent overcutting, the above steps must be left with a sufficient margin and finally the finishing process. Under normal circumstances, try to check on the machine tool, remove it after passing the test, and then prepare the next piece of processing.

6. Finish

There is a variety of finishing options for surface treatment after machining the CNC parts, including manual cornering, sandblasting, polishing, sandblasting, painting, silkscreen, plating, oxidation, etc.

Cleanup corners: Due to the congenital defects in CNC machining, the structural clearing angle cannot be fully in place. Almost all the engraved and milled workpieces need to be manually chiseled with specific tools, and then the assembly relationship is adjusted.

Smoothing: It is part of the surface treatment during the production of prototype parts. Generally, the hand board needs to be polished after being machined by the machine CNC, because the surface of the hand board will have some burrs, knife marks, etc. Sanding paper is needed for sanding and it has different sandpaper. Grade, the smaller the number, the thicker the sand, the larger the number, the smaller the sand.

Polishing: Generally, both PMMA and PC need to be polished to achieve a transparent or mirror effect.

Sandblasting: Sandblasting can remove the burrs on the surface of the part (smaller), make the surface form a small pit, prepare for the subsequent surface processing, form the pressure layer on the surface, and improve the surface fatigue resistance.

Painting: Spray paint has a protective and beautiful effect. The supplier is coloring according to the Pantone or RAL number given by the customer.

Silkscreen: In the process that you need to print the logo, you can choose the color.

Plating: It is a process of attaching a metal film to the surface of a metal or other material by electrolysis to prevent metal oxidation (such as rust), improve wear resistance, electrical conductivity, light reflectivity, corrosion resistance (copper sulfate, etc.) ) and enhance the appearance of beauty.

Oxidation: It is a wide-ranging process for overcoming the defects of aluminum alloy surface hardness and wear resistance, expanding the application range, and prolonging the service life.

Summary

CNC machining is the most widely used process for prototyping. As a professional prototype manufacturer, Wayken is excellent at CNC machining various parts. Short lead time,  tight tolerances, moderate price, welcome contact us for any inquiry.

Start your project

Introduction

In today’s fast-paced world, personal growth is more important than ever. Individuals are constantly seeking ways to improve themselves, their relationships, and their overall well-being. Strengthening techniques can help you unlock your full potential and achieve the goals you’ve always dreamed of. In this article, we will explore proven methods for personal growth that can lead to lasting change and improvement in your life.

Understanding Personal Growth

Personal growth refers to the ongoing process of understanding and developing oneself to achieve one’s fullest potential. It involves various aspects, including emotional, intellectual, and spiritual growth. The journey of personal growth is unique for everyone, shaped by individual experiences, values, and aspirations. It encourages self-reflection and a proactive approach to self-improvement.

Key Strengthening Techniques for Personal Growth

• Goal Setting: Setting clear, achievable goals is fundamental to personal growth. Goals provide direction and purpose, allowing you to focus your efforts. Use the SMART criteria (Specific, Measurable, Achievable, Relevant, Time-bound) to create meaningful goals that can guide your journey.
• Mindfulness and Meditation: Practicing mindfulness and meditation enhances self-awareness and helps reduce stress. By focusing on the present moment, you can cultivate a deeper understanding of your thoughts and emotions, leading to improved mental clarity and emotional regulation.
• Continuous Learning: Adopt a mindset of lifelong learning. Engage in activities such as reading books, attending workshops, and taking online courses. Expanding your knowledge not only enriches your life but also opens new opportunities for personal and professional growth.
• Journaling: Keeping a journal allows for personal reflection and can be a powerful tool for growth. Writing about your thoughts, experiences, and feelings helps you process emotions and track your progress over time. It can also clarify your goals and identify patterns in your behavior.
• Networking: Surround yourself with positive influences and like-minded individuals who inspire growth. Building a supportive network can provide you with valuable insights, encouragement, and motivation. Attend community events, seminars, or online forums to connect with others who share your interests.
• Physical Fitness: Engaging in regular physical exercise contributes significantly to both physical health and mental well-being. Exercise releases endorphins, which can improve mood and reduce feelings of anxiety. Consider activities that you enjoy, whether it’s running, yoga, dancing, or team sports.
• Emotional Intelligence Development: Emotional intelligence (EI) involves the ability to understand and manage your emotions, as well as the emotions of others. Improving your EI can enhance your communication skills, empathy, and interpersonal relationships. Practice active listening, express gratitude, and learn to respond rather than react in emotional situations.
• Time Management: Effective time management is crucial for personal growth. Prioritize tasks according to urgency and importance, and create a balanced schedule that allows time for work, relaxation, and self-care. Tools like calendars and to-do lists can help you stay organized and focused.

Implementing Strengthening Techniques

To effectively implement these techniques into your life, consider the following steps:

1. Start Small: Begin with one or two techniques that resonate with you. Trying to implement too many changes at once can be overwhelming. Focus on mastering a couple of techniques before introducing new ones.
2. Set a Routine: Incorporate these practices into your daily or weekly routine. Create specific time slots for activities like meditation, exercise, or journaling to ensure they become habits.
3. Track Progress: Regularly assess your progress and adjust your methods as needed. Use tools like habit trackers to visualize your achievements and stay motivated.
4. Stay Committed: Remain consistent and patient; personal growth is a journey, not a race. Embrace setbacks as learning opportunities and celebrate small victories along the way.
5. Seek Feedback: Don’t hesitate to ask for feedback from trusted friends, family, or mentors. Constructive criticism can provide valuable insights that illuminate areas for improvement.

The Benefits of Personal Growth

Engaging in personal growth can lead to numerous benefits, including:

• Increased Self-Awareness: Understanding your strengths, weaknesses, and emotions can lead to better decision-making and improved relationships.
• Improved Relationships: As you grow personally, you may find that your relationships with others become more meaningful and fulfilling. Enhanced communication skills and emotional intelligence foster deeper connections.
• Enhanced Decision-Making Skills: With greater self-awareness and knowledge, you can make informed decisions that align with your values and goals.
• Greater Resilience: Personal growth equips you with tools to cope with challenges and setbacks, fostering a mindset of resilience and adaptability.
• Increased Overall Life Satisfaction: As you work towards your goals and develop new skills, you may find a greater sense of fulfillment and happiness in your life.

Overcoming Obstacles to Personal Growth

While the journey of personal growth is rewarding, it may come with challenges. Here are common obstacles and strategies to overcome them:

• Fear of Failure: The fear of failing can hold you back from pursuing your goals. To combat this, reframe failure as a learning opportunity and a necessary step in your growth process.
• Lack of Motivation: Motivation can fluctuate, making it difficult to stick to your goals. Find your intrinsic motivation by reminding yourself of the reasons behind your goals and the benefits they will bring.
• Negative Self-Talk: Combat negative self-talk by practicing self-compassion. Challenge negative thoughts and replace them with positive affirmations that reinforce your self-worth.
• Time Constraints: Busy schedules can make it challenging to prioritize personal growth. Look for pockets of time in your day—such as during your commute or lunch breaks—to dedicate to your growth activities.

Conclusion

Strengthening techniques are powerful tools for unleashing your potential and fostering personal growth. By implementing these proven methods, you can take significant steps towards a more fulfilling and successful life. Remember, the journey of personal growth is ongoing, and every effort counts towards making a positive change. Embrace the process, celebrate your progress, and never stop striving to become the best version of yourself.